lemon-mirror:
Home >> Mazda >> 2020 >> 6 Sport >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN M) >> Fuel Pressure Sensor Inspection >> Function Inspection >> Notes

Function Inspection: Notes

  1. Connect the M-MDS to the DLC-2.
  2. Switch the ignition ON (engine off).
  3. Display the PID FUEL_PRESS. (See ON-BOARD DIAGNOSTIC TEST [PCM (SKYACTIV-G 2.5 (WITH CYLINDER DEACTIVATION))] .) (See PCM INSPECTION (VIN M) .)
  4. Compare the voltage and fuel value indications for the PID FUEL_PRESS with the standard in the table indicated below.
    • If they do not match the standard, perform the voltage inspection. (See VOLTAGE INSPECTION .)
· About lemon-mirror