lemon-mirror:
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> Brakes >> Traction Control >> Dynamic Stability Control (Service Information) >> DSC HU/Cm Removal/Installation >> Brake Pipe Installation Note

Brake Pipe Installation Note

  1. Align the marks made before removal and install the brake pipe to the DSC HU/CM and brake pipe joint referring to the figure.
    G12234491Courtesy of MAZDA MOTORS CORP.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
· About lemon-mirror