lemon-mirror:
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Active Driving Display Removal/Installation

Active Driving Display Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the battery. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G (VIN Y)] .) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G (VIN M)] .) )
  3. Disconnect the brake pipes from the master cylinder. (See MASTER CYLINDER REMOVAL/INSTALLATION .)
  4. Remove the following parts:
    1. Side wall (driver side) (See SIDE WALL REMOVAL/INSTALLATION .)
    2. Front heat duct (LH) (See FRONT HEAT DUCT REMOVAL/INSTALLATION .)
    3. Brake pedal (See BRAKE PEDAL REMOVAL/INSTALLATION .)
    4. Meter hood No. 2 (See METER HOOD REMOVAL/INSTALLATION .)
  5. To prevent scratches, apply protective tape to the active driving display lens.
    CAUTION:
    • When removing the active driving display, the active driving display lens could contact the dashboard panel frame and scratch or damage the active driving display lens. When removing the active driving display, apply protective tape to the active driving display lens before performing the servicing.
    G12237571Courtesy of MAZDA MOTORS CORP.
  6. Remove the nuts.
    G12237572Courtesy of MAZDA MOTORS CORP.
  7. Remove the bracket.
  8. Remove the demister duct No. 1.
  9. Remove the bolts.
    G12237573Courtesy of MAZDA MOTORS CORP.
  10. Disconnect the connector.
  11. Tilt the active driving display in the direction of the arrow shown in the figure.
    G12237574Courtesy of MAZDA MOTORS CORP.
  12. Move the active driving display in the direction of the arrow shown in the figure.
    G12237575Courtesy of MAZDA MOTORS CORP.
  13. Move the active driving display in the direction of the arrow shown in the figure and remove it.
    G12237576Courtesy of MAZDA MOTORS CORP.
  14. Install in the reverse order of removal.
  15. After installation, add brake fluid, bleed the air, and inspect for fluid leakage. (See BRAKE FLUID AIR BLEEDING .)
· About lemon-mirror