Active Driving Display
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
- Switch the ignition ON (engine off or on).
- Select [Settings] on the center display.
- Select [AD-Disp] on the center display.
- Select an item name, and then select option.
| Display Of Center Display | Function | Initial Setting | Settings | Control Module |
|---|---|---|---|---|
| Active Driving Display | Setting can be changed so that the active driving display is not displayed. | On | On/Off | Instrument cluster |
| Height | The display height (up/down position) can be changed. | 0 | 13 steps up/down from initial setting (total: 27steps) | Instrument cluster |
| Brightness Control | The method for adjusting the display brightness (automatically/manually) can be changed. | AUTO | AUTO/MANUAL | Instrument cluster |
| Calibration | The standard brightness with the automatic brightness adjustment can be changed. | 0 | 2 steps up/down from initial setting (total: 5steps) | Instrument cluster |
| Brightness | The standard brightness with the manual brightness adjustment can be changed. | 0 | 20 steps up/down from initial setting (total: 41steps) | Instrument cluster |
| Rotate | The tilt of the displayed image can be adjusted. | 0 | 3 steps up/down from initial setting (total: 7steps) | Instrument cluster |
| Navigation system guidance | The turn-by-turn (TBT) display can be switched on/off. | ON | ON/OFF | Connectivity master unit (CMU) |
| Street name display | The street name display can be switched on/off. | On-Demand | Off/Always/On-Demand | Instrument cluster |