Power Window System Initialization Procedure
WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- If the following operations have been performed, the initial setting is reset, and auto up/down operation are disabled. Therefore, performing the initial setting is necessary.
- Negative battery cable is disconnected.
- Power window main switch connector is disconnected.
- Power window system power supply fuse is removed.
- Switch the ignition ON (engine off).
- Press the power window switch to fully open the door glass.
- Pull up the power window switch to the manual-up position to fully close the door glass and keep holding the switch up at the position for approx. 2 s.