lemon-mirror:
Home >> Mazda >> 2021 >> 6 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (Power Systems) >> Relay And Fuse Block Disassembly/Assembly

Relay And Fuse Block Disassembly/Assembly

WARNING: This page is about a different car, the 2018 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure below.
    Fig 1: Inserting Tape-Wrapped Flathead Screwdriver Into Service Hole
    G12237507Courtesy of MAZDA MOTORS CORP.
  2. Move the flathead screwdriver in the direction of the arrow (1) shown in the figure below, and pull up the relay and fuse block No. 1 in the direction of the arrow (2) shown in the figure below to detach the relay and fuse block No. 2 tab from relay and fuse block No. 1.
    Fig 2: Pulling Up Relay And Fuse Block No. 1
    G12237508Courtesy of MAZDA MOTORS CORP.
  3. Detach all the relay and fuse block No. 2 tabs from relay and fuse block No. 1, and remove relay and fuse block No. 1 from relay and fuse block No. 2.
  4. Assemble in the reverse order of disassembly.
· About lemon-mirror