lemon-mirror:
Home >> Mazda >> 2021 >> CX-3 AWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical System >> Timing Chain Removal/Installation >> Engine Front Cover Removal Note

Engine Front Cover Removal Note

  1. Remove the nut shown in the figure and set the cooler hose (LO) aside.
    G13149244Courtesy of MAZDA MOTORS CORP.
  2. Remove the insulator shown in the figure.
    G13149245Courtesy of MAZDA MOTORS CORP.
  3. Set the ground cable and wiring harness bracket shown in the figure aside.
    G13149246Courtesy of MAZDA MOTORS CORP.
  4. Remove the engine front cover installation bolts.
  5. Using a screwdriver wrapped in a cloth, peel the silicone sealant away a little at a time, and remove the engine front cover.
    CAUTION:
    • Do not apply excessive force to the screwdriver. Otherwise, the engine front cover could be damaged.
    • Be careful not to scratch or damage the seal surface. Otherwise, it could cause oil leakage.
    G09785099Courtesy of MAZDA MOTORS CORP.
    G13107908Courtesy of MAZDA MOTORS CORP.
· About lemon-mirror