Start Stop Unit Inspection: Notes

NOTE:

Terminals with terminal voltage that cannot be measured are not indicated in the terminal voltage table (reference).

Remove the Column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).
- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.
  - If the system does not work normally even though the inspection items or related wiring harnesses do not have any malfunction, replace the start stop unit. (See START STOP UNIT REMOVAL/INSTALLATION .)