lemon-mirror:
Home >> Mazda >> 2021 >> CX-3 FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Conventional Brake System) >> Power Brake Unit Removal/Installation >> Snap Pin Installation Note

Snap Pin Installation Note

WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the snap pin as shown in the figure.
Fig 1: Identifying Snap Pin
G10909667Courtesy of MAZDA MOTORS CORP.