lemon-mirror:
Home >> Mazda >> 2021 >> CX-5 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Conventional Brake System) >> Power Brake Unit Inspection >> Using SST >> After-Inspection Procedure

After-Inspection Procedure

WARNING: This page is about a different car, the 2016 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. After the inspection, remove the SSTs  , install the brake hose, clamp, and brake pipe to the original positions, and then bleed the air from the brake line. (See BRAKE HOSE (FRONT) REMOVAL/INSTALLATION  and BRAKE FLUID AIR BLEEDING .)
· About lemon-mirror