lemon-mirror:
Home >> Mazda >> 2021 >> CX-9 Signature >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Power Systems) >> Relay And Fuse Block Disassembly/Assembly

Relay And Fuse Block Disassembly/Assembly

WARNING: This page is about a different car, the 2017 Mazda CX-9. However, it is still accessible from the selected car via links, so may be relevant.
  1. Insert a tape-wrapped flathead screwdriver into the service hole in the position shown in the figure.
    Fig 1: Inserting Tape-Wrapped Flathead Screwdriver Into Service Hole
    G11432421Courtesy of MAZDA MOTORS CORP.
  2. While pressing the tab of relay and fuse block No. 2 in the direction of the arrow (1) shown in the figure, pull relay and fuse block No. 1 and relay and fuse block No. 2 in the direction of the arrows (2) to detach the tab of relay and fuse block No. 2 from relay and fuse block No. 1.
    Fig 2: Pressing Tab Of Relay And Fuse Block No. 2 Using Screwdriver
    G11432422Courtesy of MAZDA MOTORS CORP.
  3. Detach all tabs of relay and fuse block No. 2 from relay and fuse block No. 1, and remove relay and fuse block No. 1 from relay and fuse block No. 2.
  4. Assemble in the reverse order of disassembly.
· About lemon-mirror