lemon-mirror:
Home >> Mercedes Benz >> 1986 >> 560SL >> Repair and Diagnosis >> Engine Performance >> System >> Cis-E System >> Component Testing >> Idle & Full Load Contact

Idle & Full Load Contact

  1. Connect on-off ratio tester to diagnostic socket and turn on ignition. On-off ratio should be about 70%. Deflect airflow sensor plate about .79" (20 mm). On-off ratio should be 10%. Go to step 2).
  2. If reading is 70%, throttle valve contact does not close or there's an interruption in wire to idle speed contact. Close airflow sensor plate. On-off ratio should be 40%. Go to step 3).
  3. Open throttle valve fully. On-off ratio should be 20%. If not okay, replace full load contact. If okay, test is complete.
· About lemon-mirror