Gearshift system, function - GF27.60-P-2000G
TRANSMISSION 722.6 in MODEL 163, 170, 202, 208, 210 without touch shift
TRANSMISSION 722.6 in MODEL 129, 140
Operation
In automatic transmission 722.6 the electrohydraulic control module converts the electrical signals produced by the electronic transmission control (ETC) into hydraulic signals.
The shift linkage makes the mechanical connection between the selector lever and transmission in the selector lever positions "P", "R", "N", "D". Selector lever positions "4", "3", "2", "1" are triggered electrically, a transmission upshift is only possible up to the preselected shift range.
Faults occurring in the ETC control module (N15/3) are handled by the limp-home system. This is designed to allow the driver to reach a service outlet even under extreme conditions.
| Function of gear change | GF27.60-P-3010G | ||
| Limp-home mode, function | GF27.60-P-3012G | ||
| Manual drive mode selection, function | Model Series 129, 140, 170, 202, 208, 210 | GF27.60-P-3011G | |
| Model Series 163 | GF27.60-P-3011GH | ||
| Oil level control, function | GF27.10-P-3024G | ||
| Function of torque converter lockup clutch control | GF27.20-P-3002G |