Starter control function - GF15.30-P-3000GC
ENGINE 111.983 #0 in MODEL 170.449 with CODE (494a) USA version
After engine start speed is reached, the start control interrupts the power flow (circuit 50) to the solenoid switch of the starter (starter shutoff).
The solenoid switch of the starter is actuated not through the ignition/starter switch, but through the starter relay by the engine control module.
The voltage for the starter relay (coil) is supplied through circuit 87. The starter relay is actuated by the engine control module through ground.
Start recognition by the engine control module is effected through circuit 50 by simultaneously operating the clutch pedal and the ignition/starter switch from position 2 into start position. When an engine speed of 400 - 700 rpm is reached, the engine control module interrupts the ground actuation to the starter relay and thus the start operation.
| ME-SFI control module position/task/design/function | GF07.61-P-5000GS | ||
| Crankshaft position sensor position/task/design/function | GF07.04-P-4116F | ||
| Start recognition function | through circuit 50 | GF07.13-P-3014G | |
| Starter relay | Model 170: in cycle module (N65k2) Model 202, 208, 210: in fuse and relay module (K40/4k2) |
||
| Starter | |||
| Ignition/starter switch | |||
| Electronic ignition switch (EIS) control module position/task/design/function | (models with DAS 3) | GF80.57-P-4102A | |
| Clutch pedal switch position/task/function | GF29.10-P-2100F |