Service Campaign 2011070001 - Update Fuel System Control Module Software (2011070001)

Publication date: 2012-03-09
Reference number: 2011070001

SERVICE CAMPAIGN 2011070001 - UPDATE FUEL SYSTEM CONTROL MODULE SOFTWARE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2011070001, Date of Issue: March 9, 2012

MERCEDES-BENZ:	Model 216 Model Year 2011
GROUP:	00 OF SERVICE INFORMATION BINDER
GROUP:	I OF INFORMATION _ PARTS & ACCESSORIES BINDER

Superceded Bulletin(s): 2011070001, Date of Issue: August 12, 2011

SUBJECT

Model 216 Model Year 2011

Update Fuel System Control Module Software

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the Fuel System Control Module software may not meet current specifications on affected vehicles. Dealers will update the Fuel System Control Module software at the next workshop visit.

Prior to performing this Service Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Please note that Recall and Service Campaigns do not expire and may also be performed on a vehicle with a vehicle status indicator.

Approximately 78 vehicles are affected.

PROCEDURE

NOTE:

Use DAS/Xentry 05-06/2011 or higher.
Follow the steps exactly as described in DAS/Xentry.
Connect battery charger (battery voltage >12.5V).
Turn off all of vehicle's electrical consumers prior to updating control module software.
If you are performing this campaign on a vehicle that also requires the following campaigns: P-SC-2011070002 and P-SC-2011070003 , perform the campaigns in the following order: 1 ^st : SCN Code Control Module (P-SC-2011070002 ), 2 ^nd : Update Transmission Control Module Software (P-SC-2011070003 ), last: This campaign (P-SC-2011070001).

Connect Star Diagnosis to vehicle.
Update fuel system control unit (FSCU) software:
Control units / Drive / FSCU / Fuel pump / Control unit adaptations / Control unit programming.
Follow on-screen instructions.

NOTE:

Perform service work on other vehicles while the software for the control module is being updated.
The following allowable labor operation(s) should be used when submitting a warranty claim for this repair:
If you are performing this campaign on a vehicle that also requires the following campaigns: P-SC-2011070002 and P-SC-2011070003 ; you can only claim operation numbers 02-5058 and 02-4762 once.

WARRANTY INFORMATION

Operation:

Battery charger, Connect (with SDS Connected) (02-5058)
Star Diagnosis System (SDS), Connect/disconnect (02-4762).
Update fuel system control module software (with DAS connected) (02-7218).

WARRANTY INFORMATION

Damage Code	Operation Number	Model Indicator(s)
54 941 40 8	02-5058	DF
	02-4762
	02-7218

NOTE: Operation code times are subject to change. Please refer to StarTime for current labor times.