lemon-mirror:
Home >> Mercedes Benz >> 2012 >> GL350 >> Repair and Diagnosis >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure

ATEQ TPMS Reset Procedure

  1. Set the tire pressure of all wheels to pressure specified on the tire and loading information label.
  2. Make sure that the SmartKey is in POSITION 2 in the ignition lock.
  3. Press and hold the lower left-hand button on the multifunction steering wheel until the standard display appears in the multifunction display.
  4. Press and hold the arrows button (upper left button on the multifunction steering wheel) until the tire pressure of each wheel or the Tire pressure displayed after driving for a few minutes message appears.
  5. Press the reset button on the instrument cluster (far left of the instrument cluster). "Restart tire pressure monitor?" message will appear in the multifunction display.
  6. Press the plus/minus button (upper right button on the multifunction steering wheel). The Tire Pressure Monitor Restarted message appears in the multifunction display.
  7. After driving for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and monitored.
· About lemon-mirror