Service Campaign 2013090002 - Update Engine Control Module Software (2013090002)

Publication date: 2013-11-05
Reference number: 2013090002

SERVICE CAMPAIGN 2013090002 - UPDATE ENGINE CONTROL MODULE SOFTWARE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2013090002, Date of Issue: November, 2013

MERCEDES-BENZ:

Models 166, X166, 212, 221, Model Year 2013

SUBJECT

Models 166, X166, 212, 221, Model Year 2013

Update Engine Control Module Software

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the engine control module software does not correspond to current production configuration. An authorized Mercedes-Benz dealer will update the engine control module software at the next workshop visit.

Prior to performing this Service Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Approximately 11,715 vehicles are affected.

PROCEDURE

NOTE:

Use DAS/Xentry 09/10-13 with add-on 3170 or higher.
Follow the steps exactly as described in DAS/Xentry.
Connect battery charger (battery voltage >12.5V).
Ensure all electrical consumers are switched-off.
In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the "pre-call" check list before contacting UHD.
Refer to Star Diagnosis System (SDS) Best Practices Guide.

Update engine control unit software:
Control units/Drive/CDI control unit/Control unit adaptations/Control unit programming.
Follow on-screen instructions.

NOTE: Please verify CDI software number change after performing the software update.

WARRANTY INFORMATION

Operation

Connect/disconnect battery charger (02-5058)
Star Diagnosis System (SDS), Connect/disconnect (02-4762)
Update engine control module software (with DAS connected) (02-8241)

WARRANTY INFORMATION

Damage Code	Operation Number	Labor Time (hrs.)
54 955 38 8	02-5058	0.1
	02-4762	0.1
	02-8241	0.1

NOTE: Operation Number labor times are subject to change.