Service Campaign 2016030007 - Update For Engine Control Module Software (2016030007)

Publication date: 2016-04-01
Reference number: 2016030007

SERVICE CAMPAIGN 2016030007 - UPDATE FOR ENGINE CONTROL MODULE SOFTWARE

SERVICE CAMPAIGN BULLETIN

Reference Number(s): 2016030007, Date of Issue: April 2016

MERCEDES-BENZ:

Model 166, Model Year 2016

SUBJECT

Model 166, Model Year 2016

Update for Engine Control Module Software

This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the software for the engine control module does not correspond to the current series production configuration, where the hose 'disconnect monitoring function' is not performed at the intended frequency. An authorized Mercedes-Benz dealer will update the software for the engine control module.

Prior to performing this Service Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Approximately 1163 vehicles are affected.

PROCEDURE

NOTE:

Use DAS/Xentry 03-04/16 with all associated patches or higher.
Follow the steps exactly as described in DAS/Xentry.
Connect battery charger (battery voltage >12.5V).
Ensure all electrical consumers are switched-off.
In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the "pre-call" check list before contacting UHD
Refer to Star Diagnosis System (SDS) Best Practices Guide.

Update software for engine control module:
"Control units view => Drive type => CDI motor electronics => N3/9 CR43 motor electronics for combustion engine OM651 => Adaptations => Control unit update => Update of control unit software".
Follow on-screen instructions.

WARRANTY INFORMATION

Operation:

Connect/disconnect battery charger (02-5058)
Star Diagnosis System (SDS), Connect/disconnect (02-4762)
Update engine control module software (02-9334).

WARRANTY INFORMATION

Damage Code	Operation Number	Labor Time (hrs.)
49 920 37 8	02-5058	0.1
	02-4762	0.1
	02-9334	0.1

NOTE: Operation Number labor times are subject to change.