Fuel Injected Models
Disconnect the return line at throttle body and connect hose to container. Connect pressure gauge at diagnostic fitting on throttle body. Disconnect wiring connector at fuel tank and apply 12 volts to pump with jumper wire.
FUEL PUMP SPECIFICATIONS
| Application | Specification | |
|---|---|---|
| Carbureted Models | ||
| Pressure | 6-8 psi (.42-.56 kg/cm2 ) | |
| Volume | 1 Pint (.5L) in 20 seconds | |
| Fuel Injected Models | ||
| Pressure Delivery | 35-45 psi (2.5-3.2 kg/cm2 ) | |
| Working | 39-49 psi (2.7-3.4 kg/cm2 ) | |
| Volume | 1 Pint (.5L) in 30 seconds | |