lemon-mirror:
Home >> Mercury >> 1985 >> Lynx Base, 2D Hatchback, 1.6 2 >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - Diesel >> Testing >> Cold Start Device Diagnosis >> Notes

Cold Start Device Diagnosis: Notes

  1. Engine must be at normal operating temperature. Rotate CSD lever clockwise to stopper. Use photoelectric tachometer (Rotunda 99-0001) to check engine RPM.
  2. Engine speed must be 1450-1550 RPM. If not, check injection pump timing. See Figure . Check cold start device to verify proper operation. See Cold Start Device Operation table.
    COLD START DEVICE OPERATION

    Engine Temp. °F (°C) Injection Pump Timing Engine RPM
    Below 45 (7) 8° BTDC 1450-1550
    45-68 (7-20) 5° BTDC 1050-1350
    Over 68 (20) 0° TDC 725-775
  3. Apply 20 in. Hg of vacuum to CSD diaphragm. CSD lever should move 1.1" (28 mm). If not, and vacuum diaphragms are not leaking, replace injection pump.
· About lemon-mirror