lemon-mirror:
Home >> Mercury >> 1986 >> Lynx Base, MTXII >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - 4-CYL Diesel >> Testing >> Fuel System Testing >> Injection Pump Transfer Pressure

Injection Pump Transfer Pressure

  1. Remove banjo bolt from fuel return line. Install Fuel Line Adapter (10326) in banjo fitting. See Figure . Connect adapter line to 0-160 psi (0-11.25 kg/cm2 ) pressure gauge. Run engine at 4000 RPM under no load.
  2. Pressure reading should be 95-110 psi (6.7-7.7 kg/cm2 ). If not, replace injection pump.
· About lemon-mirror