lemon-mirror:
Home >> Mercury >> 1993 >> Capri Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Commutator Test

Commutator Test

  1. Clean surface of commutator and polish with No. 400 grit sandpaper (if required). If surface is scored, out of round or pitted, turn commutator on a lathe.
  2. Maximum commutator runout and minimum diameter of commutator must not exceed specification after turning. See STARTER MOTOR SPECIFICATIONS  table.
  3. Commutator mica undercut depth should be .02-.03" (.5-.8 mm). If undercut depth is not within specification, undercut with a hacksaw blade to standard depth.
· About lemon-mirror