lemon-mirror:
Home >> Mercury >> 1993 >> Villager LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Overhead Console) >> Overhead Console >> Installation

Overhead Console: Installation

WARNING: This page is about a different car, the 2004 Dodge Pickup and 2004 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the overhead console in the vehicle.
  2. Connect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors.
  3. Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit.
  4. Install the overhead console retaining screw, located in the front of console. Torque the screw to 1.2 N.m (10 in. lbs.).
  5. Connect the negative battery cable.
· About lemon-mirror