lemon-mirror:
Home >> Mercury >> 1996 >> Villager LS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System - Remote >> Testing >> Pinpoint Test D - Keypad Switch Does Not Sound

Pinpoint Test D - Keypad Switch Does Not Sound

  1. Disconnect 16-pin control module connector. Using jumper wire, connect harness connector Green/Yellow wire to ground. If keyless entry beeper does not sound, go to next step. If beeper sounds, replace lock control module.
  2. Disconnect keyless entry beeper connector. Measure voltage of Green/Red wire at connector. If more than 10 volts, go to next step. If less than 10 volts, repair Green/Red wire.
  3. Measure resistance of Green/Yellow wire between keyless entry beeper and 16-pin control module connector. If resistance is more than 5 ohms, replace Green/Yellow wire. If resistance is less than 5 ohms, replace keyless entry beeper.
· About lemon-mirror