lemon-mirror:
Home >> Mercury >> 1998 >> Villager LS >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul 3.0L >> Ignition System >> Distributor >> Removal

Ignition System: Distributor: Removal

  1. Remove high tension leads and distributor cap. Rotate crankshaft in direction of normal rotation until piston No. 1 is at TDC of compression stroke. Disconnect negative battery cable. Ensure timing marks are aligned.
  2. Disconnect distributor wiring from harness. Place reference marks on distributor rotor-to-housing and housing-to-engine. Remove distributor hold-down bolt(s) and clamp. Remove distributor. Inspect distributor "O" ring and replace if necessary.
· About lemon-mirror