Repair and Diagnosis: Electrical: Starters: Description

The starting system consists of a gear reduced starter motor, battery, remote control switch (ignition switch) and relay. Vehicles equipped with automatic transaxle have a Transmission Range (TR) sensor attached to the circuit which prevents operation of the starter motor unless Neutral or Park are selected. Vehicles equipped with a manual transaxle have a start inhibit switch in the starter control circuit, which prevents operation of the starter motor unless the clutch pedal is in the applied position.

The sequence of operation is as follows:

• Ignition switch in START position III.
• Starter relay activated.
• Voltage provided to the starter motor solenoid.
• Starter solenoid engages the drive pinion to the ring rear.
• Starter solenoid switches the battery current to the starter motor.
• System remains engaged until the ignition switch is released.