lemon-mirror:
Home >> Mercury >> 2007 >> Monterey >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Driven Sprocket Support >> Assembly

Driven Sprocket Support: Assembly

  1. Make sure that the seals are mated correctly during installation.
    2. Fig 1: Properly Aligned Seal Ends
    GF0020254Courtesy of FORD MOTOR CO.
    CAUTION: The seal rings must be installed correctly. Transmission failure could result.
  2. Install new Teflon® seals and the No. 5 thrust washer.
    3. Fig 2: Teflon® Seal Rings & No. 5 Thrust Washer
    GF0020290Courtesy of FORD MOTOR CO.
· About lemon-mirror