Fuel System - Repair (F60 PHEV)

• 13 31 Fuel Delivery Pressure Check
  • 13 31 029 Checking fuel delivery pressure (B38 hybrid powertrain)
• 13 51 Fuel Injection Pump
  • 13 51 017 Removing and installing/replacing high pressure pump (B38 hybrid powertrain)
• 13 53 Fuel Injectors, Fuel Rail, Fuel Lines
  • Clean the cylinder head in the area of the injectors with sandy/dusty contamination
  • 13 53 035 Removing and installing/replacing feed line (B38 hybrid powertrain)
  • 13 53 156 Removing and installing/replacing rail (B38 hybrid powertrain)
  • 13 53 180 Removing and installing/replacing pressure line between rail and high pressure pump (B38 hybrid powertrain)
  • 13 53 318 Removing and installing/replacing all injectors (B38 hybrid powertrain)
  • 13 53 596 Replace the rail pressure sensor (B38 hybrid powertrain)
• 13 54 Throttle Body
  • 13 54 030 Removing and installing/sealing throttle body (B38 hybrid powertrain)
• 13 62 Engine Sensors
  • 13 62 531 Replacing coolant temperature sensor (B38 hybrid powertrain)
  • 13 62 560 Removing and installing/replacing the hot film air mass meter (B38 hybrid powertrain)
  • 13 62 590 Replace the boost pressure sensor (before throttle valve) (B38 hybrid powertrain)
  • 13 62 591 Replacing the boost pressure sensor (on intake plenum) (B38 hybrid powertrain)
• 13 64 Fuel Injector Cleaning
  • 13 64 579 Cleaning all injectors (after vehicle diagnosis)
    • Preparing the ultrasound device
    • Filling the ultrasound device with cleaning agent
    • Cleaning injectors in the ultrasonic device
• 13 71 Engine Air Filter
  • 13 71 000 Removing and installing/replacing intake filter housing (B38 hybrid powertrain)
  • 13 71 000 Replacing air filter insert (B38 hybrid powertrain)
  • 13 71 031 Replace air inlet duct for intake filter housing
    • Remove the air inlet duct for intake silencer housing
    • Install the air inlet duct for the intake filter housing
  • 13 71 035 Remove the clean air pipe (B38 hybrid powertrain)
• 13 90 EVAP Canister Purge Valve
  • 13 90 500 Replacing tank vent valve (B38 hybrid powertrain)