lemon-mirror:
Home >> Mitsubishi >> 1993 >> Precis Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Bench Testing >> Hold-In Coil Test

Hold-In Coil Test

  1. Disconnect field coil wire from terminal "M" at starter solenoid. See Figure. Connect jumper wire between positive battery terminal of 12-volt battery and terminal "S" of starter solenoid.
  2. Connect a second jumper wire from negative battery terminal and touch starter case. If solenoid plunger is pulled in, hold-in coil is good. If solenoid plunger is not pulled in, replace solenoid.
· About lemon-mirror