lemon-mirror:
Home >> Mitsubishi >> 1994 >> Eclipse Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Component Testing >> Reed Switch >> Continuity Check

Continuity Check

  1. Remove instrument cluster. See INSTRUMENT CLUSTER  under REMOVAL & INSTALLATION. Check continuity between reed switch terminals No. 1 and 2. SeeFig 1 .
  2. Ensure continuity pulses on and off 4 times per revolution of speedometer shaft connection. If continuity is not as specified, replace reed switch.
Fig 1: Identifying Reed Switch Test Terminals
G92D00193Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
· About lemon-mirror