Mechanical Inspection: Compression
Check engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer manual for specific instructions.
WARNING:
DO NOT
use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate the engine's oiling system.
Check engine compression with engine at normal operating temperature, all spark plugs removed and throttle wide open.
COMPRESSION SPECIFICATIONS
| Application (1) | Specification | ||
|---|---|---|---|
| Compression Ratio (VIN M & P) | 9.0:1 | ||
| Compression Pressure (VIN M & P) | 171 psi (12.0 kg/cm2 ) | ||
| Maximum Variation Between Cylinders | 14 psi (1.0 kg/cm2 ) | ||
|
|||