Secret Code Registration Method: Notes

Each individual secret code is registered inside the transmitter, and so it is necessary to resister these codes with the EEPROM inside the receiver in the following cases:

• When the transmitter or ETACS-ECU is replaced.
• If more transmitters are to be used.
• If it appears that a problem is occurring because of faulty registration of a code.

A maximum of 4 different codes can be stored in the EEPROM memory (4 different transmitters can be used). When the code for the first transmitter is registered, the previously registered codes for all transmitters are cleared. Therefore, if you are using 2 or more transmitters or are adding more transmitters, the codes for all transmitters must be registered at the same time.