lemon-mirror:
Home >> Mitsubishi >> 2003 >> Outlander LS, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle >> On-Vehicle Service >> A/T Control Relay Check

A/T Control Relay Check

  1. Remove the A/T control relay.
  2. Use jumper wires to connect the A/T control relay terminal 2 to the negative battery terminal and terminal 3 to the positive battery terminal.
  3. Check for continuity between A/T control relay terminals 1 and 4 when the jumper wires are connected to and disconnected from the battery.
    Fig 1: Checking A/T Control Relay Continuity
    G01863720Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: A/T Control Relay Continuity Chart
    G01863719Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  4. If there is any problem with the A/T control relay, replace it.
· About lemon-mirror