lemon-mirror:
Home >> Mitsubishi >> 2004 >> Endeavor LS, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Traction Control System (TCL) >> On-Vehicle Service >> TCL Switch Check

TCL Switch Check

  1. Remove the TCL switch. (Refer to TCL SWITCH ).
  2. Measure the resistance between terminal 1 and terminal 2 when the TCL switch is pressed or released. If the values measured at the time correspond to those in the table below, the resistance values are correct.
TESTER CONNECTION

SWITCH POSITION TESTER CONNECTION SPECIFIED CONDITION
Pressed 1-2 Less than 2 ohms
Released 1-2 Open circuit
· About lemon-mirror