lemon-mirror:
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Side Cover >> Disassembly And Assembly >> Assembly

Disassembly And Assembly: Assembly

CAUTION:
  • Never reuse the D-rings.
  • Apply ATF to the D-rings before installation.
  1. Install D-rings onto the 2-6 brake piston.
    Fig 1: Identifying D-Rings
    G04871439Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Apply ATF to the 2-6 brake piston before installation.
  2. Install the 2-6 brake piston onto the side cover.
    Fig 2: Identifying Brake Piston Onto Side Cover
    G04871441Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Install the spring retainer assembly onto the 2-6 brake piston.
    Fig 3: Identifying Return Springs
    G04871437Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Ensure that the spring compressor (Special Tool: A) is correctly set, directly above the return springs of the spring retainer assembly.
  4. While pushing the spring retainer assembly using a spring compressor (Special Tool: MB992196), install the snap ring.
    Fig 4: Identifying Special Tools
    G04871436Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION:
    • Never reuse the seal rings.
    • Apply Vaseline to the seal rings before installation.
  5. Install seal rings onto the side cover.
    Fig 5: Identifying Seal Rings
    G04871435Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
· About lemon-mirror