lemon-mirror:
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Engine Electrical >> Generator >> Removal >> 3.7L /4.7L

3.7L /4.7L

Fig 1: Identifying Generator, B+ Terminal Mounting Nut, Plastic Insulator Cap And Field Wire Connector
G04854946Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
WARNING: DISCONNECT NEGATIVE CABLE FROM BATTERY BEFORE REMOVING BATTERY OUTPUT WIRE (B+ WIRE) FROM GENERATOR. FAILURE TO DO SO CAN RESULT IN INJURY OR DAMAGE TO ELECTRICAL SYSTEM.
  1. Disconnect negative battery cable at battery.
  2. Remove generator drive belt. Refer to COOLING for procedure.
  3. Unsnap plastic insulator cap (3) from B+ output terminal.
  4. Remove B+ terminal mounting nut (2) at rear of generator. Disconnect terminal from generator.
  5. Disconnect field wire connector (4) at rear of generator by pushing on connector tab.
    Fig 2: Identifying Rear Vertical Generator Mounting Bolt, Front Horizontal Generator Mounting Bolts And Generator
    G04854947Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  6. Remove 1 rear vertical generator mounting bolt (2).
  7. Remove 2 front horizontal generator mounting bolts (1).
  8. Remove generator from vehicle.
· About lemon-mirror