BARTEC TPMS Reset Procedure

IMPORTANT: Mitsubishi Adapter must be connected to the 400P/400SD/500. ADAPTER is NOT NEEDED on the PRO SERIES TOOLS.

You will select either

Reduce pressure to activate sensors.
Use a second activation tool to activate sensor.

OBD Connect: Assisted Relearn

Inflate tires to correct pressure.
Read all sensor IDs using tool.
Connect tool to OBDII port using the Mitsubishi adapter.
Turn Ignition ON.
Follow on screen prompts to relearn IDS to the vehicle.
Tool will indicate relearn completed.

NOTE: If you reduced the pressure to complete, your TPMS light may be on until tires are inflated to placard.