General Information - Lancer Evolution

• How To Use This Information
  • Maintenance, Repair And Servicing Explanations
  • On-Vehicle Service
  • Service Procedures
  • Definition Of Terms
    • Standard Value
    • Limit
    • Reference Value
    • Danger, Warning, And Caution
    • Tightening Torque Indication
    • Special Tool Note
    • Abbreviations
  • Explanation Of Manual Contents
• Troubleshooting Guidelines
  • Verify The Complaint
  • Determine Possible Causes
  • Find The Problem
  • Repair The Problem
  • Verify The Repair
• How To Use Troubleshooting/Inspection Service Points
  • Troubleshooting Contents
    • Notes
    • 1. Standard Flow Of Diagnostic Troubleshooting
    • 2. System Operation And Symptom Verification Tests
    • 3. Diagnostic Function
    • 4. Diagnostic Trouble Code Chart
    • 5. Symptom Chart
    • 6. Diagnostic Trouble Code Procedures
    • 7. Symptom Procedures
    • 8. Service Data Reference Table
    • 9. Check At Ecu Terminals
      • Notes
      • Terminal Voltage Checks
      • Terminal Resistance And Continuity Checks
    • 10. Inspection Procedures Using An Oscilloscope
  • How To Use The Inspection Procedures
    • Notes
    • Harness Inspection
    • Measures To Take After Replacing The Ecu
  • Connector Measurement Service Points
    • Notes
    • If Inspecting With The Connector Connected <Waterproof Connectors>
    • If Inspecting With The Connector Connected <Ordinary (Non-Waterproof) Connectors>
    • If Inspecting With The Connector Disconnected
  • Connector Inspection Service Points
    • Visual Inspection
    • Connector Pin Inspection
    • Connector Engagement Inspection
  • How To Cope With Intermittent Malfunctions
    • Notes
    • 1. Ask The Customer About The Malfunction
    • 2. Determine The Conditions From The Customer's Responses
    • 3. Use Simulation Test
    • 4. Verify The Intermittent Malfunction Is Eliminated
    • Simulation Tests
  • How To Treat Past Trouble
  • Inspection Service Points For A Blown Fuse
• Vehicle Identification
  • Vehicle Identification Number Plate
  • Models
    • Vehicle Identification Number List
      • Vehicles For USA (Vehicles For 50 States)
      • (Vehicles For PUERTO RICO)
      • Vehicles For CANADA
  • Chassis Number
  • Vehicle Identification Code Plate
  • Tire And Loading Information Placard
  • Engine Model Stamping
• Precautions Before Service
  • Cautions For Working In Engine Compartment
  • Supplemental Restraint System (SRS)
  • Scan Tool (Multi Use Tester {M.U.T.-III} Sub Assembly)
  • How To Perform Vehicle Identification Number (VIN) Writing
    • Notes
    • Writing Procedure
    • VIN Writing Steps For WCM And Kos-Ecu
  • Coding List
    • Notes
    • Variant Coding
    • Option Coding
  • Initialization Procedure For Learning Value In MFI Engine
    • Notes
    • Initialization Procedure
  • Engine Idling Learning Procedure
    • Purpose
    • Learning Procedure
    • Initialization Procedure For Throttle Actuator Control Motor
  • Timing Chain Maintenance
    • Notes
    • Learned Value Read & Save And Write Learned Value (Changed Ecu)
    • Learned Value Reset
    • Test/Limit Value Readout
  • Servicing Electrical System
  • How To Shift Lock Forced Release
  • Vehicle Washing
  • Application Of Anti-Corrosion Agents And Undercoats
  • Bolts And Nuts With Stabilizer For Coefficient Of Friction
  • Form-In-Place Gasket (FIPG)
    • Notes
    • Disassembly
    • Gasket Surface Cleaning
    • Application Procedure
• Towing And Hoisting
  • Wrecker Towing Recommendation
    • Front Towing Pickup
    • Rear Towing Pickup
    • Towing When Keys Are Not Available
  • Safety Precautions
  • Lifting, Jacking Support Location
    • Floor Jack And Rigid Rack
    • Post Type
• General Data And Specifications
  • Vehicles For USA (Includes PUERTO RICO)
  • Vehicles For CANADA
• Tightening Torque
• Lubrication And Maintenance
  • Notes
  • Maintenance Schedules
  • Severe Service
  • Engine Oil
  • Lubricants And Greases
  • Fuel Usage Statement
  • Gasoline Containing Alcohol
  • Gasoline Containing Methyl Tertiary Butyl Ether (MTBE)
  • Materials Added To Fuel
• Recommended Lubricants And Lubricant Capacities Table
  • Recommended Lubricants
  • Lubricant Capacity Table
  • Lubricant Selection
    • Engine Oil
    • Oil Viscosity
    • Coolant
• Scheduled Maintenance Table
  • Scheduled Maintenance Service For Emission Control And Proper Vehicle Performance
  • General Maintenance Service For Proper Vehicle Performance
  • Scheduled Maintenance Under Severe Usage Conditions
• Maintenance Service
  • 1. Fuel System (Tank, Pipe Line And Connection, And Fuel Tank Filler Tube Cap) (Check For Leaks)
  • 2. Fuel Hoses (Check Condition)
  • 3. Air Cleaner Element (Replace)
  • 4. Evaporative Emission Control System (Except Evaporative Emission Canister) (Check For Leaks And Clogging)
  • 5. Spark Plugs (Replace)
  • 6. Intake And Exhaust Valve Clearance (Inspect And Adjust)
  • 7. Drive Belt (For The Generator And Power Steering Oil Pump) (Replace)
  • 8. Exhaust System (Connections Portion Of Muffler, Muffler Pipes And Converter Heat Shields) (Check And Service)
  • 9. Engine Oil (Change)
  • 10. Engine Oil Filter (Replace)
  • 11. Manual Transaxle Oil (Check Oil Level And Condition/RCHANGE)
    • Transaxle Oil Level Check
    • Transaxle Oil Change
  • 12. Twin Clutch-SPORTRONIC Shift Transmission (TC-SST) [Check The Fluid Leakage (If Necessary, Check The Fluid Level) /Change]
    • TC-SST Fluid Leakage Check
    • TC-SST Fluid Level Check
    • Transmission Fluid Change
  • 13. Twin Clutch Sport-Shift Transmission Oil Filter (Change)
  • 14. Transfer Oil (Check Oil Level/Change)
    • Transfer Oil Check
    • Transfer Oil Change
  • 15. Reserve Tank Fluid (For Active Center Differential And Active Yaw Control System) (Check Fluid Level)
    • Fluid Level Check
      • < When The Scan Tool Is Not Used>
      • < When The Scan Tool Is Used>
  • 16. Engine Coolant (Change)
  • 17. Coolant Hoses (Radiator Hose, Heater Hose) (Inspect)
  • 18. Disk Brake Pads And Rotors (Inspect For Wear)
    • Disk Brake Pad Check
    • Brake Disk Thickness Check
    • Front Brake Disk Run-Out Check And Correction
  • 19. Brake Hoses (Check For Deterioration Or Leaks)
  • 20. Ball Joint And Steering Linkage Seals (Inspect For Grease Leaks And Damage)
  • 21. Drive Shaft Boots (Inspect For Grease Leaks And Damage)
  • 22. Suspension System (Inspect For Looseness And Damage)
  • 23. Rear Axle Oil (For Differential Part) (Change)
  • 24. Rear Axle Oil (For Torque Transfer Mechanism Part) (Change)
  • 25. Tires (Rotate)
  • 26. Air Purifier Filter (Replace)
• Main Sealant And Adhesive Table