lemon-mirror:
Home >> Mitsubishi >> 2012 >> RVR ES >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator Assembly >> Inspection >> Brush

Generator Assembly: Inspection: Brush

  1. Measure the length of the protrusion of the brush. Replace the brush if the protrusion length is shorter than the limit.

    Limit: 2 mm (0.1 inch) minimum 

    Fig 1: Measuring Length Of Protrusion Of Brush
    G05393725Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  2. Unsolder the lead of the brush. The brush will come out, becoming ready for removal.
  3. Install a new brush by pushing it into the holder as shown in the illustration and soldering the lead.
    Fig 2: Identifying Solder
    G05393726Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
· About lemon-mirror