Generator Assembly: Inspection: Stator

Check the electrical continuity of the points shown in the table below. Confirm that there is electrical continuity.

If there is not, replace the stator.

Terminal connector of tester	Electrical continuity
1 - 2	Presence of electrical continuity
1 - 3
2 - 3
4 - 5
4 - 6
5 - 6

Fig 1: Identifying Stator Electrical Continuity Of Points

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Check the electrical continuity of the points shown in the table below. Confirm that there is not electrical continuity.

If there is, replace the stator.

Terminal connector of tester	Electrical continuity
1 - Core	Absence of electrical continuity
2 - Core
3 - Core
4 - Core
5 - Core
6 - Core

Fig 2: Checking Insulation Between Stator Coil Terminal And Core

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Check the electrical continuity of the points shown in the table below. Confirm that there is not electrical continuity.

If there is, replace the stator.

Terminal connector of tester	Electrical continuity
1 - 4	Absence of electrical continuity
1 - 5
1 - 6
2 - 4
2 - 5
2 - 6
3 - 4
3 - 5
3 - 6

Fig 3: Checking Insulation Between Coil Terminals Of Group

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.