System Initialization: Description
If any of the following operations are performed, the initialization is necessary for normal operation of power window system. Refer to WORK PROCEDURE .
- When front power window motor (driver side) replaced.
- Power supply to the front power window motor (driver side) is not cut off properly.
- Removal and installation of regulator assembly.
- Removal and installation of front power window motor (driver side) from regulator assembly.
- Operation of regulator assembly as an independent unit.
- Removal and installation of door glass.
- Removal and installation of door glass run.
CAUTION:
The following specified operations cannot be performed under the non-initialized condition.
- Auto-up operation
- Anti-pinch function