Check Shift Position

Turn the power supply mode of the electric motor switch to ON and check the following:

1. When the selector lever shifts to each position during depressing the brake pedal, the shift position normally changes.
2. When the brake pedal is not depressed at the "P" position, the shift position does not change even if the selector lever is operated.
3. When the electrical parking switch is pressed and released at any shift position except the "P" position, the shift position changes into the "P" position.
4. When the selector lever shifts to the "D/B" position again at the "D" position, the shift position changes into the "B" mode.
5. When the selector lever shifts to the "D/B" position again at the "B" mode, the shift position changes into the "D" position.
6. When the power supply mode of the electric motor switch turns OFF, the shift position automatically changes into the "P" position. (The selector indicator light of the "P" position turns ON.)
7. If the driver' side seat belt is disengaged, and the door is opened while the shift position is not the "P" position, the shift position will automatically switch to the "P" position.

   Is the inspection result normal? 

   YES: INSPECTION END

   NO: Check the electric shift control system.