Self-Diagnostic System: Notes
CAUTION:
Be sure ignition switch is off when disconnecting connectors from control unit. While testing, be careful not to bend any pins and do not touch more than 1 pin at a time with meter lead as meter or control unit could be damaged.
Malfunctioning system is determined by number of blinks of both the Red and Green light emitting diodes (LEDs) on ECCS. See Fig 1 . Red should blink, followed by Green. Red represents the tenth digit and Green represents unit digits. For example, if Red blinks 2 times followed by Green blinking 5 times, this would represent code 25.