System Description
WARNING: This page is about a different car, the 2005 Nissan Frontier. However, it is still accessible from the selected car via links, so may be relevant.
Power is supplied at all times
- Through 10A fuse [No. 20, located in fuse block (J/B)]
- To stop lamp switch terminal 1, and
- To stop lamp relay terminals 1 and 3 (with VDC).
When the brake pedal is pressed, the stop lamp switch is closed and power is supplied
- Through stop lamp switch terminal 2
- To rear combination lamp LH and RH (stop) terminal 1
- To high-mounted stop lamp terminal 1
- To ABS actuator and electric unit (control unit) terminal 41, and
- To stop lamp relay terminal 5 (with VDC).
Ground is supplied
- To rear combination lamp LH and RH (stop) terminal 2
- Through grounds E9, E15 (all) and E24 (VQ40DE engine only), and
- To high-mounted stop lamp terminal 2
- Through grounds B117 and B132.
With power and ground supplied, the stop lamps illuminate.