lemon-mirror:
Home >> Nissan-Datsun >> 2006 >> Quest Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - Component Diagnosis >> ASCD Brake Switch >> Component Inspection >> ASCD Brake Switch

ASCD Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ASCD brake switch harness connector.
  3. Check harness continuity between ASCD brake switch terminals 1 and 2 under the following conditions.
    ASCD BRAKE SWITCH CONTINUITY

    Condition Continuity
    Brake pedal: Fully released Should exist
    Brake pedal: Slightly depressed Should not exist

    If NG, adjust ASCD brake switch installation, refer to , "BRAKE PEDAL ", and perform step  3 again.

    Fig 1: Checking Continuity Between Terminals No. 1 & 2
    G04101963Courtesy of NISSAN MOTOR CO., U.S.A.
· About lemon-mirror