Detailed Flow
- COLLECT THE INFORMATION FROM THE CUSTOMER
Get the detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred) using the diagnosis work sheet. Refer to "DIAGNOSTIC WORK SHEET ".
GO TO 2.
- PERFORM THE SELF-DIAGNOSIS
Perform self-diagnosis for "ABS" with CONSULT-III.
Is there any DTC displayed?
YES: GO TO 3.
NO: GO TO 4.
- PERFORM THE SYSTEM DIAGNOSIS
Perform the diagnosis applicable to the displayed DTC for "ABS" with CONSULT-III. Refer to "DTC INDEX ".
GO TO 7.
- CHECK THE SYMPTOM THAT IS NOT CONSIDERED A SYSTEM MALFUNCTION
Check that the symptom is a normal operation that is not considered a system malfunction. Refer to "DESCRIPTION ".
Is the symptom a normal operation?
YES: INSPECTION END
NO: GO TO 5.
- CHECK THE WARNING LAMP AND INDICATOR LAMP FOR ILLUMINATION
Check that the warning lamp and indicator lamp illuminate.
- ABS warning lamp: refer to "DESCRIPTION ".
- Brake warning lamp: refer to "DESCRIPTION ".
- VDC OFF indicator lamp: refer to "DESCRIPTION ".
- VDC warning lamp: refer to
"DESCRIPTION ".
Is ON/OFF timing normal?
YES: GO TO 6.
NO: GO TO 2.
- PERFORM THE DIAGNOSIS BY SYMPTOM
Perform the diagnosis applicable to the symptom for "ABS" with CONSULT-III.
GO TO 7.
- REPAIR OR REPLACE THE MALFUNCTIONING PARTS
Repair or replace the specified malfunctioning parts.
GO TO 8.
- MEMORY CLEAR
Perform self-diagnosis memory clear for "ABS" with CONSULT-III.
GO TO 9.
- FINAL CHECK
Perform the self-diagnosis again, and check that the malfunction is repaired completely.
Is no other DTC present and the repair completed?
YES: INSPECTION END
NO: GO TO 3.