System Initialization: Description

If any of the following operations are performed, the initialization is necessary for normal operation of power window system.

• Disconnection and connection of battery cable from negative terminal.
• When power window main switch or front power window switch (passenger side) replaced.
• Electric power supply to power window main switch or front power window switch (passenger side) or power window motor (driver side/passenger side) is interrupted by blown fuse or disconnection and connection of the negative terminal of battery, etc.
• Disconnection and connection of power window main switch or front power window switch (passenger side) harness connector.
• Removal of power window motor (driver side/passenger side) from regulator assembly.
• Operation of regulator assembly as an independent unit.
• Removal and installation of glass.
• Removal and installation of door glass run.
  CAUTION: The following specified operations can not be performed under the non-initialized condition.

  • Auto-up operation
  • Anti-pinch function