lemon-mirror:
Home >> Nissan-Datsun >> 2012 >> Sentra SE-R >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS U0101 To P0159 (Qr25DE) >> DTC P0116: ECT Sensor >> Overall Function Check

Overall Function Check

  1. CHECK ENGINE COOLANT TEMPERATURE (ECT) SENSOR
    1. Turn ignition switch OFF.
    2. Disconnect ECT sensor harness connector.
    3. Remove ECT sensor. Refer to , "COMPONENT ".
    4. Check resistance between ECT sensor terminals by heating with hot water as shown in the figure.
    Terminals Condition Resistance (kΩ)
    1 and 2 Temperature [°C (°F)] 20 (68) 2.10 - 2.90
    50 (122) 0.68 - 1.00
    90 (194) 0.236 - 0.260
    Fig 1: Checking Resistance Between Engine Coolant Temperature Sensor Terminals 1 And 2
    G04874991Courtesy of NISSAN NORTH AMERICA, INC.

    Is the inspection result normal? 

    YES: GO TO 2.

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

  2. CHECK INTERMITTENT INCIDENT

    Check intermittent incident. Refer to "DIAGNOSIS PROCEDURE ".

    Is the inspection result normal? 

    YES: INSPECTION END 

    NO: Proceed to "DIAGNOSIS PROCEDURE ".

· About lemon-mirror