Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
| Component |
Signal description |
| Yaw rate/side/decel G sensor |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line:
- Yaw rate signal
- Side G sensor signal
- Decel G sensor signal
|
| VCM |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
- Accelerator pedal position signal
- VCM control signal
- Shift position signal
|
| Electrically-driven intelligent brake |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication line:
- Electrically-driven intelligent brake control signal
- Brake warning lamp request signal
- Brake system warning lamp request signal
|
| Steering angle sensor |
Mainly transmits the following signal to ABS actuator and electric unit (control unit) via CAN communication:
- Steering angle sensor signal
|
| Combination meter |
Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:
- Brake fluid level switch signal
- Parking brake switch signal
Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication:
- ABS warning lamp signal
- VDC warning lamp signal
- Brake warning lamp signal
- Brake system warning lamp signal
- VDC OFF indicator lamp signal
|