Additional Service When Replacing Control Unit: Description
CAUTION:
- When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle.
- Be sure to perform the following systems saving and writing or reregistration when replacing BCM.
- BCM
- All keys
Perform the following operations when replacing BCM. For details, refer to Work Procedure .
BEFORE REPLACEMENT
When replacing BCM, save or print current vehicle specification with CONSULT before replacement.
NOTE:
If "Before ECU Replacement" of "Vehicle Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.
AFTER REPLACEMENT
CAUTION:
When after replacing BCM, always perform "Operation Log Selection" or "Manual Configuration" with CONSULT. Or not doing so, BCM control function does not operate normally.
- Complete the procedure of "Re/programming, Configuration" in order.
- Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
- If you set incorrect "Vehicle Configuration", incidents might occur.